584,837 active members*
5,284 visitors online*
Register for free
Login

Thread: 5v supply

Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2005
    Posts
    65

    5v supply

    My motors,drives and bob came in and would like to start testing but the usb cord that came with it has wrong plugs on ends.
    I understand this is to supply 5v for pul+ dir+ en . Can I wire from pc power supply ide plug yellow or red wire to get 5v needed without harming anything?

  2. #2
    Join Date
    Jul 2016
    Posts
    660

    Re: 5v supply

    Yes you can' but not yellow though, it`s red and black, yellow is 12VDC, the 2 black wires are the same (Ground)

  3. #3
    Join Date
    Jul 2005
    Posts
    65

    Re: 5v supply

    Thanks, I didnt remember which color but knew one was 12v and other was 5v. I will check with meter to make sure. Thanks again.

Similar Threads

  1. Replies: 1
    Last Post: 01-12-2017, 07:12 AM
  2. Replies: 15
    Last Post: 10-29-2013, 12:58 AM
  3. How'd you supply your power supply?
    By cnczane in forum DIY CNC Router Table Machines
    Replies: 12
    Last Post: 08-28-2011, 11:13 AM
  4. Power Supply from a computer power supply
    By jmytyk in forum CNC Machine Related Electronics
    Replies: 21
    Last Post: 01-11-2006, 09:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •