Although this is not a huge problem, it can be annoying. I have mach3 on 2 computers. The one the runs the CNC show the image as slightly distorted, IE. a circle as an oval, with it being long on the X axis. It does produce the machined material correctly though. Just wondering why, and how to fix. thanks.
Thread: mach3 screen
Results 1 to 2 of 2
-
08-18-2017, 10:27 PM #1
Registered
- Join Date
- Mar 2016
- Posts
- 46
mach3 screen
-
09-14-2017, 10:39 PM #2
Registered
- Join Date
- Feb 2017
- Posts
- 7
Re: mach3 screen
I think if you check"reversed arch's in front tool post" , it gets rid of that. Config> Ports and Pins> Turn options
Reply With QuoteSimilar Threads
-
Mach3 2010 Screen set
By ger21 in forum Screen Layouts, Post Processors & MiscReplies: 1505Last Post: 02-12-2024, 06:45 AM -
Mach3 screen set
By PEU in forum Screen Layouts, Post Processors & MiscReplies: 3Last Post: 11-28-2014, 11:00 AM -
Mach3 Touch Screen
By ariel6 in forum Screen Layouts, Post Processors & MiscReplies: 0Last Post: 07-28-2013, 09:15 AM -
mach3 display screen
By woodman08 in forum Mach MillReplies: 5Last Post: 08-18-2009, 05:45 PM -
Personalizar el screen del Mach3
By Creisen in forum SpanishReplies: 1Last Post: 07-19-2007, 01:30 AM
Tags for this Thread
Posting Permissions
