584,829 active members*
4,951 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hitachi Seikis > Seicos Slbus error- Fanuc 18-ima
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    75

    Seicos Slbus error- Fanuc 18-ima

    Hello ,

    there is a slbus initialization error while power on, machine is vs50 with Fanuc 18-ima ( seicos E-18M)

    after change 9988 #4 parameter, machine gave 790 Bram error, we clear it by system table , then this alarm appear , we can not reset yet

    anyone help?

    video is here https://youtu.be/W0ojfTSu9p8

  2. #2
    Join Date
    Oct 2019
    Posts
    17

    Re: Seicos Slbus error- Fanuc 18-ima

    I know this is old but the issue was likely caused by only partially enabling the data server. That is not the only parameter that needs enabled, also the system table needs to be modified as well.

    An SRAM restore prior to fooling around with it will bring the machine back to life.

Similar Threads

  1. Seicos III LSPC Status Error
    By MIKE MITCHELL in forum Hitachi Seikis
    Replies: 0
    Last Post: 03-13-2017, 03:23 PM
  2. SLBUS ERROR
    By FIXIN in forum Hitachi Seikis
    Replies: 3
    Last Post: 08-04-2014, 12:51 PM
  3. Hitachi Seiki Seicos 5117 error
    By bevins in forum Hitachi Seikis
    Replies: 15
    Last Post: 08-04-2014, 01:05 AM
  4. Hitachi Seikos 3 SLBUS error
    By =aike= in forum Mori Seiki Mills
    Replies: 5
    Last Post: 11-02-2013, 01:31 AM
  5. Hitachi Sieki VM 40 PC not ready-slbus error
    By CJMFG in forum DNC Problems and Solutions
    Replies: 2
    Last Post: 04-09-2011, 12:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •