Originally Posted by
MichaelHenry
I have a new Nova 24 with the CW-5000 chiller and am having problems getting it to cut or engrave routinely. Most of the time when I press the Start-Pause button after loading a U-File the Nova 24 immediately errors out with a "Water Error" message. If I ESC that re-try Start-Pause and repeat that cycle enough times I can eventually get the laser to finish a job. Once a job has started it has always finished so far. I've verified that the chiller is working correctly, that the laser tube has water flow, and that the flow switch in the chiller is operating correctly so I'm looking for any other event that would cause the Nova 24 to display the "Water Error" message.