584,846 active members*
4,118 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Visual Mill > Help: Need copy of VM 6
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2010
    Posts
    109

    Help: Need copy of VM 6

    Hey Guys and Gals,
    I need to install a fresh copy of VM 6 but somehow can only locate my VM 5 CD. I have talked to Mecsoft and they are telling me that VM 6 is no longer supported and are unable to send me a copy. I understand that VM 6 is quite old, but I was hoping that someone might have a copy of it laying around and be able to post it or email it. My dongle is already updated to VM6 so should be no issue getting it up and running...Thanks for any help folks!
    Erik

  2. #2
    Join Date
    Jan 2007
    Posts
    325
    Quote Originally Posted by Erik F View Post
    Hey Guys and Gals,
    I need to install a fresh copy of VM 6 but somehow can only locate my VM 5 CD. I have talked to Mecsoft and they are telling me that VM 6 is no longer supported and are unable to send me a copy. I understand that VM 6 is quite old, but I was hoping that someone might have a copy of it laying around and be able to post it or email it. My dongle is already updated to VM6 so should be no issue getting it up and running...Thanks for any help folks!


    Erik
    I MIGHT have a copy somewhere. I will look for it and let you know.

    BobL.

  3. #3
    Join Date
    Apr 2010
    Posts
    109
    Quote Originally Posted by boblon View Post
    I MIGHT have a copy somewhere. I will look for it and let you know.

    BobL.
    Hi BobL.
    Thanks for taking a look. Did you ever have any luck?

Similar Threads

  1. Anyone know how to copy to MDI
    By Paul_S in forum Haas Mills
    Replies: 1
    Last Post: 05-24-2018, 09:27 PM
  2. Copy Index
    By lenny09 in forum BobCad-Cam
    Replies: 3
    Last Post: 12-22-2015, 07:48 AM
  3. 11M Copy Key
    By utengineer04 in forum Fanuc
    Replies: 2
    Last Post: 07-12-2007, 05:52 PM
  4. anyone have a copy
    By NCcustom in forum Mastercam
    Replies: 2
    Last Post: 02-02-2006, 03:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •