584,812 active members*
5,381 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > Help identifying this stepper Drive
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2017
    Posts
    0

    Help identifying this stepper Drive

    I have three of these stepper drivers. They came in a box with three Pacific scientific Max Drive II 65 volt DC stepper motors. There are no markings on the board that would give away the model. I've spent hours searching Google image search eBay and all over the Internet to no avail.https://uploads.tapatalk-cdn.com/201...bbcbc9417e.jpghttps://uploads.tapatalk-cdn.com/201...07fc3ca1d6.jpghttps://uploads.tapatalk-cdn.com/201...2f5c9e432b.jpg

    Sent from my LG-LS777 using Tapatalk

  2. #2
    Join Date
    May 2005
    Posts
    1397

    Re: Help identifying this stepper Drive

    Can't help with the motor id but this page may help you figure out the wiring and try them out

    techref.massmind.org/techref/io/stepper/wires.htm
    James hosts the single best wiki page about steppers for CNC hobbyists on the net:
    http://www.piclist.com/techref/io/steppers.htm Disagree? Tell him what's missing! ,o)

  3. #3
    Join Date
    Jan 2007
    Posts
    23

    Re: Help identifying this stepper Drive

    They look very similar to the old ones on my 12 year old multicam m series. I sealed them out cos the caps blew. The ones I had were called United scientific or something along those lines. But mine were only 48 v

    Sent from my SM-G935F using Tapatalk

  4. #4
    Join Date
    Sep 2017
    Posts
    0

    Re: Help identifying this stepper Drive

    Well this is how far I have gotten. Powe in and motor wiring. Now I need to figure out the direction pulse ect.https://uploads.tapatalk-cdn.com/201...5a7d6213cb.jpg

    Sent from my LG-LS777 using Tapatalk

  5. #5
    Join Date
    Sep 2017
    Posts
    0

    Re: Help identifying this stepper Drive

    I have found similar 14 and 20 pin ic's. I'll have to d a little more comparing.

    Sent from my LG-LS777 using Tapatalk

Similar Threads

  1. Help identifying an old stepper driver board
    By spencoid in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 12-07-2010, 09:32 AM
  2. Help identifying this motor. Can this be used in place of a stepper?
    By joprinz in forum Stepper Motors / Drives
    Replies: 7
    Last Post: 01-29-2010, 01:40 AM
  3. Help with identifying stepper motors
    By viroy in forum Stepper Motors / Drives
    Replies: 9
    Last Post: 05-08-2008, 06:19 AM
  4. Need Help Identifying This Stepper
    By silver in forum Stepper Motors / Drives
    Replies: 0
    Last Post: 11-13-2006, 06:59 AM
  5. help identifying this stepper controller
    By aminear in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 02-28-2006, 09:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •