584,850 active members*
4,188 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2016
    Posts
    13

    808d 1325 Milling CNC - Looking for PLC

    So I have an 808d with a 3 axis milling macine with an ATC but the machine is not yet commissioned and I need the PLC written. I have been told however if I can find someone with roughly the same config, it will be easy to copy their PLC. Any help is greatly appreciated.

  2. #2

    Re: 808d 1325 Milling CNC - Looking for PLC

    You might try posting on the Machinist page on Facebook: https://www.facebook.com/groups/Machinist/

    While the group can be a bit.... rough... there's also a lot of REALLY good guys on there... altho with 98k+ members, there's a fair share of asshats, but you can just ignore them. There hasn't been ANY problem yet I've had where at least one person was able to help me with a solution.

  3. #3
    Join Date
    Sep 2009
    Posts
    16

    Re: 808d 1325 Milling CNC - Looking for PLC

    I will not work! you have to find la PLC programmer to help you with that

Similar Threads

  1. Replies: 10
    Last Post: 04-09-2019, 08:48 AM
  2. WAIT FOR SPINDLE, SIEMENS 808D MILLING
    By abid khan in forum SIEMENS -> GENERAL
    Replies: 1
    Last Post: 03-13-2016, 09:02 PM
  3. Sinomac S1-1325 5 axis cnc milling
    By Winni-Sinomac06 in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 05-19-2015, 03:22 AM
  4. High quality cnc router/cnc milling machine S7-1325 for woodworking
    By Alice-sinomac07 in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 02-14-2015, 01:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •