good day.. i have a takisawa macv3 with the same fanuc 6m control.. i have the same issues with this thread and follow same instruction with all of quote and reply above.. but doesnt work for me.. my major concern for now is i dont get any display on control pannel its blank only when i press on.. if i plugout the ccx cable which goes to the crtc puncher. screen will go bright as greeen.. any help will highly appreciated..
Results 21 to 22 of 22
-
07-18-2019, 08:35 AM #21
Member
- Join Date
- Jul 2019
- Posts
- 3
Re: FANUC 6M Control will not power on
-
03-11-2022, 02:16 AM #22
Member
- Join Date
- Mar 2022
- Posts
- 15
Re: FANUC 6M Control will not power on
I have the same machine, with the same problem... Were you able to get yours going again..?
Originally Posted by jhommyboy
Reply With QuoteSimilar Threads
-
Matsuura MC-1000V with Fanuc 15M control doesn't power
By forhire in forum FanucReplies: 28Last Post: 07-15-2018, 11:20 PM -
Fanuc oi-mc not sending power to control
By MADJ in forum FanucReplies: 1Last Post: 03-11-2016, 08:54 PM -
Fanuc 0 control power supply blown twice.
By Harmeet in forum FanucReplies: 15Last Post: 09-20-2015, 06:40 AM -
Fanuc ROBOCUT Alpha-1B will not power on the control
By TRG in forum EDM Discussion General TopicsReplies: 1Last Post: 07-04-2011, 09:51 PM -
Fanuc 10TF Control Power Issue
By rbleth51 in forum FanucReplies: 15Last Post: 08-20-2007, 08:22 PM
Tags for this Thread
Posting Permissions
