Hi all,
I have been playing around with my homemade milling machine and have decided that I need to control the spindle via linuxcnc rather than manually from the vfd. Unfortunately I do not have any idea how to do this. The connections between the VFD and breakout board. I have connected the 12V out from the VFD to the 12-24V in on the BoB to power the BoB. And logically I would connect the 10V In on the VFD to the 0-10V Out on the BoB but what else?
Can anyone help? I ahve read several articles on this but none seem to be able to definitively answer this for my particular BoB and VFD.
My BoB:Manual
My VFD AskPower A131: Manual
If someone could draw a diagram that would be great!!