584,862 active members*
5,363 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Milltronics > Partner 1 centurion V and threading, post through fusion 360
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2010
    Posts
    64

    Partner 1 centurion V and threading, post through fusion 360

    Hi all,
    I am having difficulty in getting threading to work for my milltronics vmc from fusion and am wondering if any one has had luck with it? It seems that I need to edit my post, but I am lost in this as well. My machine is equipped with rigid tapping, which I believe is G88 for milltronics and I am trying to thread metric threads. I Use IPR for g88 and the machine seems to just go over the hole and sit there with no movement. I need to figure out why my machine wont tap holes. Thanks

    Joe

  2. #2
    Join Date
    Nov 2013
    Posts
    128
    So it would be most helpful if you would post the lines that you are trying to run do we can tell what is missing.
    Without that anybody would be shooting in the dark.
    Quote Originally Posted by joedesu1 View Post
    Hi all,
    I am having difficulty in getting threading to work for my milltronics vmc from fusion and am wondering if any one has had luck with it? It seems that I need to edit my post, but I am lost in this as well. My machine is equipped with rigid tapping, which I believe is G88 for milltronics and I am trying to thread metric threads. I Use IPR for g88 and the machine seems to just go over the hole and sit there with no movement. I need to figure out why my machine wont tap holes. Thanks

    Joe

Similar Threads

  1. Getting familiar with a Partner 1 with Centurion 5??
    By Whizbang in forum Milltronics
    Replies: 6
    Last Post: 08-25-2014, 07:40 PM
  2. Partner 1G Centurion V 450 error
    By BilletCharlie in forum Milltronics
    Replies: 8
    Last Post: 07-06-2012, 02:34 AM
  3. Milltronics Partner 1, with Centurion 5
    By JOE SELLS in forum Tutorials
    Replies: 2
    Last Post: 07-24-2011, 04:33 PM
  4. Partner IV w/Centurion V Problems
    By KurtsKustom in forum Milltronics
    Replies: 19
    Last Post: 05-10-2008, 01:53 AM
  5. Partner centurion 1 control
    By jas6142 in forum Milltronics
    Replies: 1
    Last Post: 12-04-2006, 05:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •