585,933 active members*
3,584 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > MadCAM > Multicam 1000 series Post Processor

Thread: Multicam 1000 series Post Processor

Results 1 to 3 of 3
  1. 09-27-2017, 10:55 PM #1
    jeanyes
    jeanyes is offline Registered
    Join Date
    Nov 2008
    Posts
    43

    Multicam 1000 series Post Processor

    I'm considering the addition of a Multicam 1000 series router to my shop. Does anyone out there happen to be running one along with MadCAM? I see there are two post processor files out there but I remember having to tweak my Shop Sabre Post Processor a bit to get it to work properly. Anyone happen to have a Post Processor that they know works with a newer multicam? I have a friend that has access to one that I'd like to run a few tests on before investing in one myself. Any help would be greatly appreciated.

    Thanks,
    Jean
    Reply With Quote Reply With Quote
  2. 10-02-2017, 01:31 PM #2
    JOM
    JOM is offline Registered
    Join Date
    Feb 2006
    Posts
    183

    Re: Multicam 1000 series Post Processor

    Attached is a 3-axis post processor for Multicam. It was made back in 2010, but I think it will work. It's using standard G-codes. If needed, you are welcome to send some sample output code and I will customize a post processor for you.
    /Joakim
    Reply With Quote Reply With Quote
  3. 10-02-2017, 02:18 PM #3
    jeanyes
    jeanyes is offline Registered
    Join Date
    Nov 2008
    Posts
    43

    Re: Multicam 1000 series Post Processor

    Thank you!

    Jean
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Please help multicam series 1000 boot
    By ianb_bien21 in forum Benchtop Machines
    Replies: 1
    Last Post: 03-11-2022, 05:07 PM
  2. Mastercam x5 post processor for Multicam 3000 series
    By DRtyler in forum Post Processors for MC
    Replies: 1
    Last Post: 07-23-2015, 01:54 PM
  3. AlphaCam 2013 Post Processor for Multicam MG306 series
    By robbie9gallagan in forum Multicam Machines
    Replies: 0
    Last Post: 06-11-2013, 04:53 PM
  4. ask for multicam 1000 series operation manual
    By isam ali in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-03-2012, 05:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules