Please can someone help me, when the Q2 axes is moving is jumping and vibrating too much like in the video, and it shows the alarms 1124 and 3281 like in photo. My control is Sinumerik 840C.
https://www.youtube.com/watch?v=WbkA1rQm7pM
Attachment 374580Attachment 374580
Results 1 to 1 of 1
-
10-03-2017, 08:51 PM #1
Registered
- Join Date
- Dec 2011
- Posts
- 10
when the Q2 axes is moving is jumping and vibrating
Reply With QuoteSimilar Threads
-
Axes not moving after switching step/dir output from JP7 to JP5
By spank in forum Dynomotion/Kflop/KanalogReplies: 4Last Post: 10-23-2013, 03:10 AM -
cnc is vibrating
By hiacomm in forum MetalWork DiscussionReplies: 3Last Post: 04-03-2012, 08:18 PM -
Moving X & Y axes
By Dubliner in forum Laser Engraving / Cutting Machine General TopicsReplies: 2Last Post: 11-05-2010, 08:47 PM -
TM 2 Vibrating
By bigbaz in forum Haas MillsReplies: 13Last Post: 05-27-2009, 02:48 AM -
SOLVED - Backlash compensentation causing problems while moving 2 axes
By Hirudin in forum Mach Software (ArtSoft software)Replies: 2Last Post: 03-01-2009, 06:03 AM
Tags for this Thread
Posting Permissions
