502,376 active members
6,871 visitors online
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Lathes > Haas TL2 Lathe Alarm 177
Results 1 to 1 of 1
  1. #1
    Registered
    Join Date
    Mar 2005
    Posts
    44

    Haas TL2 Lathe Alarm 177

    When I power up the lathe I get alarm 177 and get a time out.

    The lathe is 220v single phase I was told it was moved about 20 ft in the shop and hooked back to the same disconnect it worked fine before being moved.

    It has been sitting for a few years with the main power off.

    Where do I start troubleshooting with this?

    Thanks
    Attached Thumbnails Attached Thumbnails IMG_20190711_161921.jpg  

Similar Threads

  1. Haas TL2 Lathe Alarm 177
    By machineoperator in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 0
    Last Post: 07-25-2019, 11:42 AM
  2. ALARM shuttle drawbar alarm haas
    By timmydabull in forum Haas Mills
    Replies: 28
    Last Post: 02-18-2013, 07:47 PM
  3. Replies: 2
    Last Post: 04-03-2012, 04:31 PM
  4. Alarm 233 on Haas VF-1
    By hoi.le in forum Haas Mills
    Replies: 9
    Last Post: 02-11-2011, 03:30 AM
  5. HAAS VF8 ALARM 971
    By Supafly in forum General CNC (Mill / Lathe) Control Software (NC)
    Replies: 10
    Last Post: 01-08-2010, 12:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •