Hello,
I recently bought an older Tsugami CNC swiss with live tooling. It's a 1991 NT20 with a Fanuc 0T control...B series. I was wondering if anyone else out there may have one of these older Tsugami's that has a manual in digital format: Or perhaps a list of the G&M codes with a description. I have figured out some of it from running programmes that were already in the control, but I don't know the G or M code that turns on the live tools. It does not have a programmable "C" axis, but I'm assuming that there must be a G or M code to index and lock the spindle. I'm sure there are many other G&M code functions that I will be clueless to moving forward without a manual or code list.
Any help would be greatly appreciated.