584,854 active members*
4,338 visitors online*
Register for free
Login
Page 1 of 3 123
Results 1 to 20 of 54
  1. #1
    Join Date
    May 2017
    Posts
    50

    Hitachi Seiki 5NF-800

    Hi,

    I have a Hitachi Seiki 5NF-800 and manuals.


    I help you:
    - I have manuals;
    - I help to fix something;
    - I can help you to communicate CNC with computer by RS232;
    - I’m computer engineer;



    I need help:
    - My Splindle doesn’t work;
    - I have a alarm THAL, I don’t know where;

    Contact:
    E-mail: [email protected].b
    Text message: 561-305-0544
    Cell phone: 561-305-0544
    Hi


    Sent from my iPhone using Tapatalk

  2. #2
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    TH AL is thermal overload if I remember correctly on the Spindle Drive. Take a look to ensure its powered up and in the ready stage

    John

  3. #3
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    I think is about my Spindle! Because it’s not move. Tell me more about this! Please. Thanks.


    Sent from my iPhone using Tapatalk

  4. #4
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Someone help me?


    My spindle don’t work.

    I have a SEIKE 5NF-800 ( Fanuc 6T-B).


    I make a lot of test, like:


    1) Oil reserve, its ok;
    2) Sensor door is ok, tested;
    3) The chuck open and closed when the pedal is pressing;
    4) I disconet all communication cables inside the machine, clean whit a product to circuit board, its ok;
    5) The Spindle is not FANUC, is FUJI, and i tested the board and everything ok, its working, no alarm;
    6) Im tested de Power transformer; its ok;
    7) Im tested the Fanuc Power Supply board, its ok, working;
    8) After the main power key switch, have a automatic contactor, but its not inicialize! I made a test, and the hardware is ok; Its need to receive a command to initiate; WHERE?
    9) When start the machine, everything ok, no have alarm.
    10) The star button in DGN 101 bit 2 in 1/0 is ok.
    11) Zero return, ok.
    12) The LEDs on master board is ok, everything OFF.
    13) The LED on Speed control Board is ok, two LEDs in green.
    14) I made a Memory Test when initiate the machine on MODE screen, the first LED on master board blinking, the test ok;


    A tip:
    Before, when the machine work, and you wil go to start a program and this ok, execute. And then, at the next day, if you go to start a diferent program, the machine don’t start, you need to re-open the last program used, start, the machine work, and then change the program to use, start again and the machine go perfect. this trouble is link to a memory, directory, reorganize something????




    DIAGNOSTIC INFORMATION:
    DGN 038, the value is 00010000 - means EMERGENCY STOP.
    DGN 040, the value is 00000111, is ERRO DETECT, C02(30). I tested the cable, its perfect.


    My email: [email protected]


    HELP ME !


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    Did the TH AL Alarm go away now or is it still present?

    Does the spindle drive Jog at all? If you spin by hand do you get any change in the RPM meter on the control?

  6. #6
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Hi, first my spindle stop a two month ago. Now a have a TH AL Alarm. Spindle don’t move in any mode. Just by hand, and when I put the multimeter I see some charge. Can you help me?


    Sent from my iPhone using Tapatalk

  7. #7
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    TH AL is the therma overload on that Fuji Drive - there should be an LED indicator for it. Please confirm. What is the model of the Fuji Drive - is it a DSR or FSD series?

  8. #8
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    In spindle board don’t have Leds on! Just in rele board, the name of rele on is TH AL, I sow I’m manual. Below my spindle model. Thank very much for you help me!


    Sent from my iPhone using Tapatalk

  9. #9
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800





    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    If you make this machine work again! I will send a whiskey bottle! Sure!


    Sent from my iPhone using Tapatalk

  11. #11
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Hey John! Help me! Please!


    Sent from my iPhone using Tapatalk

  12. #12
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    Send a picture of where you are seeing this alarm - I am not sure what you mean by Relay Board

    john

  13. #13
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800







    Sent from my iPhone using Tapatalk

  14. #14
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Hello! Can you help me???


    Sent from my iPhone using Tapatalk

  15. #15
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    Does this machine have a tailstock on it?

  16. #16
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Yes! There is!


    Sent from my iPhone using Tapatalk

  17. #17
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800




    Sent from my iPhone using Tapatalk

  18. #18
    Join Date
    Dec 2009
    Posts
    539

    Re: Hitachi Seiki 5NF-800

    Quote Originally Posted by JeanLuiz View Post



    Sent from my iPhone using Tapatalk
    Move the tailstock all the way forward then all the way back a few times and make sure the machine knows it's home

    John

    Sent from my SM-G930V using Tapatalk

  19. #19
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Just this part is automatically:






    Sent from my iPhone using Tapatalk

  20. #20
    Join Date
    May 2017
    Posts
    50

    Re: Hitachi Seiki 5NF-800

    Hey my friend! I still need your help!


    Sent from my iPhone using Tapatalk

Page 1 of 3 123

Similar Threads

  1. Hitachi Seiki HT 20
    By aussiejoeblow in forum Mori Seiki lathes
    Replies: 1
    Last Post: 09-14-2018, 10:07 AM
  2. Did Mori Seiki Buy Hitachi Seiki?
    By Billet Sean in forum Mori Seiki lathes
    Replies: 6
    Last Post: 05-05-2011, 04:12 AM
  3. Need Help Hitachi Seiki V-40
    By kenwalus in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 08-28-2009, 02:36 PM
  4. Hitachi Seiki
    By mroy0404 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 05-08-2007, 05:28 AM
  5. Hitachi Seiki
    By cre8tunes in forum Community Club House
    Replies: 0
    Last Post: 11-18-2006, 02:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •