Hello guys!
Im using classic "blue china laser cutter",
last week my power supply dead because of burnt isolation on ceramic transformator:
okay, **** happens I thought, and replaced burnt one with a brand new from the box...
AFTER 6 hours it has gone without ANY visible trace of burning or any other defects.
Green power LED is On, but it gives no energy to laser tube at all.
So I have the last one MYJG50W installed, it works for now, but I am not sure if it will live for a long time.
Found this video about conductive water, and leakage of current because of this
https://www.youtube.com/watch?v=si7VySd86J0
Im using just a tap water for freeze with a bid of chloride to kill algaes. Can this cause an issue because of higher conductivity of "chlored" water?
Yep, I got a slight discharge touching water in freezer.
Also, during a cut I can clearly hear electric bzzzt sound from power supply unit, is it OK? It seems this sound was present always.
If someone had such experience, please share it with us.