584,829 active members*
4,842 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2014
    Posts
    16

    Sub turret alignment Miyano BNC 34T

    Anyone have any experience with aligning the sub turret on a miyano BNC 34T? I had a pretty bad crash, the sub turret rapided into the back of a tool station on the main turret and seems like it's now way off center in both ways. For some reason the machine will preform rapid moves with the feed all the way down. Is that normal for the OT control? The sub turret still indexes but all of my tools are really far off center. I have limited experience with these machines and don't know where to begin and what I may need to take apart. Any help would be much appreciated.

  2. #2
    Join Date
    Sep 2005
    Posts
    267

    Re: Sub turret alignment Miyano BNC 34T

    How did you come out? I just started running the same machine, cool and weird at the same time, no rapid over ride sucks, was it the M90 wait code that caused the crash?

Similar Threads

  1. Miyano BNC-34t turret problem
    By mr1 in forum Fanuc
    Replies: 13
    Last Post: 09-27-2021, 06:45 PM
  2. Miyano BND Turret alignemnt Issue
    By STLMachinist in forum Fanuc
    Replies: 2
    Last Post: 05-23-2016, 06:37 PM
  3. Miyano BNC-34C turret problem!!!
    By rai in forum Fanuc
    Replies: 5
    Last Post: 05-03-2016, 03:01 PM
  4. Fanuc O-T Miyano BNC-34T Twin Turret?
    By stinkfist in forum Fanuc
    Replies: 3
    Last Post: 05-16-2014, 03:20 AM
  5. Miyano Turret
    By tight-fit-tools in forum Fanuc
    Replies: 0
    Last Post: 11-06-2012, 01:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •