[Hb66254]

Hi everyone.

I have a retrofitted cnc punch with Mach3,and i have problem running gcode from cnckad cad cam software on mach3.

Any advise about how to run gcodes for punch press on mach3?or how to edit post processor file from cnckad to run on mach3?

Appreciate your help


Sent from my iPhone using Tapatalk

[Al_The_Man]

Thread moved to Mach forum.
Al.

[Al_The_Man]

I assume you have X - Y part positioning hardware in place, if so it is usually a easy task of positioning material in the X & Y and then issue the M code to trigger the punch.
Al.

[Hb66254]

I assume you have X - Y part positioning hardware in place, if so it is usually a easy task of positioning material in the X & Y and then issue the M code to trigger the punch.
Al.

When i enter X Y axis coordinates in the gcode the table moves but away from the punch ram,how can i adjust the machine coordinates?

What is the m code to trigger the punch?

Thank you for your help.


Sent from my iPhone using Tapatalk

[Lasmian]

Hi, Anyone can help share post processor(machines file) for Amada 355 in cncKad software? help and email to: [email protected] .thks