585,741 active members*
5,283 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > mc9-view/manipulate graphics

Thread: mc9-view/manipulate graphics

Results 1 to 3 of 3
  1. 03-23-2007, 10:40 PM #1
    scolee
    scolee is offline Registered
    Join Date
    Jun 2006
    Posts
    17

    Unhappy mc9-view/manipulate graphics

    After verifying, I believe I used to be able to rotate,pan,zoom,etc.- to see if I had any gouges or whatever-now when I try to do that-I get a message along the lines of "view cannot be changed at this time" or something like that.Does anyone know how to fix this?
    Reply With Quote Reply With Quote
  2. 03-24-2007, 04:36 PM #2
    Alex_Cole
    Alex_Cole is offline Registered
    Join Date
    Mar 2005
    Posts
    215
    In the settings for verify there are a series of check boxes at the lower right part of the menu. One of these options is "Use True Solid" This must be enabled if you wish to rotate the part during or after verify.

    Let us know if this does not resolve your issue.

    AC
    Reply With Quote Reply With Quote
  3. 03-25-2007, 03:14 PM #3
    scolee
    scolee is offline Registered
    Join Date
    Jun 2006
    Posts
    17

    Talking that's all it was

    Thanks for the reply Alex-that's what it was-Thought I had checked that-Sorry to waste your time-Thanks Again


    Scott
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Resetting the top view ?
    By altered in forum Mastercam
    Replies: 4
    Last Post: 03-17-2007, 10:03 PM
  2. A Newbie's View
    By m_c in forum DIY CNC Router Table Machines
    Replies: 43
    Last Post: 06-24-2005, 06:44 PM
  3. Software to manipulate point clouds?
    By ckirchen in forum Uncategorised CAM Discussion
    Replies: 3
    Last Post: 04-05-2005, 02:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules