504,214 active members
4,780 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jul 2017
    Posts
    1

    AMADA APX100/30 - software problem?

    Hello everyone!

    I have a problem with AMADA APX100 (1995) and I need some advice. CNC Operateur -2, ATON LB450 motherboard. (KIT RETROFIT CPU486i / X40853 / C72346 - Carte mere assemblee / C72347 - Retrofit 486).

    1. I need a floppy disk with the system (image) SYS1, SYS2, TOOLS. We bought the machine used a few years ago, and the previous owner lost the backup diskettes. System diskettes are probably the same for many AMADA machines with twin controls.

    2. The program does not start completely: the computer is booted from the CF card, the driver is loaded, the validate.exe program (file check) starts. At some point (it seems to me that when checking plcn.exe) the screen turns black and the cursor flashes in the upper left corner.
    The computer crashed while writing the program, and after the restart, the above situation occurred.
    I am a servicer of cnc machines in our company, but with AMADA I do not have much experience.
    Is the problem rather in the software, or, for example, the lack of communication after the RS232 with the module located in the electrical cabinet can cause such behavior?

    3. Is it possible to connect a PS2 keyboard to this motherboard?
    I will be grateful for the tips.

    AMADAJOE, can you help me?

  2. #2
    Registered
    Join Date
    Mar 2009
    Posts
    98

    Re: AMADA APX100/30 - software problem?

    Quote Originally Posted by Makroserwis View Post
    Hello everyone!

    I have a problem with AMADA APX100 (1995) and I need some advice. CNC Operateur -2, ATON LB450 motherboard. (KIT RETROFIT CPU486i / X40853 / C72346 - Carte mere assemblee / C72347 - Retrofit 486).

    1. I need a floppy disk with the system (image) SYS1, SYS2, TOOLS. We bought the machine used a few years ago, and the previous owner lost the backup diskettes. System diskettes are probably the same for many AMADA machines with twin controls.

    2. The program does not start completely: the computer is booted from the CF card, the driver is loaded, the validate.exe program (file check) starts. At some point (it seems to me that when checking plcn.exe) the screen turns black and the cursor flashes in the upper left corner.
    The computer crashed while writing the program, and after the restart, the above situation occurred.
    I am a servicer of cnc machines in our company, but with AMADA I do not have much experience.
    Is the problem rather in the software, or, for example, the lack of communication after the RS232 with the module located in the electrical cabinet can cause such behavior?

    3. Is it possible to connect a PS2 keyboard to this motherboard?
    I will be grateful for the tips.

    AMADAJOE, can you help me?
    1. What version software? I may have 4.17 self extracting

    2. After reload software if still same condition CPU maybe faulty. I may have 1 CPU, I can load with software and send to you.

    3. Email me pictures of your CPU. I have several adapters to attach key board. Depending on version.

Similar Threads

  1. Amada Promecam APX100 getting into BIOS settings
    By superstardeejay in forum Controller & Computer Solutions
    Replies: 6
    Last Post: 04-11-2019, 05:18 PM
  2. 1998 AMADA 2415 A III No Software?? Options?
    By Mastrachuk in forum Laser Control Software
    Replies: 2
    Last Post: 09-21-2018, 03:38 PM
  3. Amada Linea 5 software generating an odd code
    By Fab-Eng-01 in forum Laser Control Software
    Replies: 0
    Last Post: 09-09-2015, 02:00 PM
  4. Amada octo problem
    By Tom Bayler in forum Community Club House
    Replies: 1
    Last Post: 08-20-2013, 07:16 PM
  5. Amada III 357v Problem
    By nak1411 in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 2
    Last Post: 11-22-2011, 02:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •