Hi guys, is there anyone currently out there that can make 6 off these parts? Either from 6061 or similar material. The OD is 63.19mm. Details on the features in the description can be provided if needed, just after a ballpark figure of what it would cost. Would it be any cheaper if I supplied the material. Thanks in advance.
Results 1 to 2 of 2
-
11-05-2017, 12:45 PM #1
Registered
- Join Date
- Nov 2017
- Posts
- 3
Aluminium Round, OD Grooved, through hole + c'bore - NSW
-
11-06-2017, 07:38 AM #2
Member
- Join Date
- May 2017
- Posts
- 73
Re: Aluminium Round, OD Grooved, through hole + c'bore - NSW
Hi，It can be cut into 6 pieces. I can cut it here by wire cutting machinesPlease contact me [email protected]
Cheers!Over 30 year in cnc machining parts business.CNC Turning, Milling, Drilling, Planning, Grinding, Welding www.plusminusthree.com Email：[email protected]
Similar Threads
-
Bore tapered hole
By DavidhCNC in forum BobCad-CamReplies: 4Last Post: 03-17-2016, 01:28 PM -
Mating Misery: Mates between V grooved bearing trucks and round rail, ITEM extrusions
By YouFoolishBoy in forum SolidworksReplies: 5Last Post: 08-07-2014, 05:12 AM -
Oversized Pulley Bore Hole
By JustinLiang in forum Mechanical Calculations/Engineering DesignReplies: 2Last Post: 12-06-2013, 10:55 AM -
How do I bore a hole with V25 lathe?
By mbam in forum BobCad-CamReplies: 10Last Post: 04-29-2013, 03:08 PM -
Helix Bore's - hole sizes not right
By kprice1658 in forum MastercamReplies: 2Last Post: 01-31-2010, 05:46 PM
Tags for this Thread
Posting Permissions
