I'm having some unexplained issue with mach 4 and pokeys57cnc. I am using pokeys60-256 drivers and cables. Motors will not enable. I've installed, uninstalled latewst versions of mach4 and plugin and followed directions, but cannot get motors active or to move within mach4. Individual testing of drivers produce expected, working results. Within mach 4, drivers are seen through I2C and correctly show voltage , temps, ect. Configuration looks correct as outlined in manual. When I enable Mach 4 to jog, there is no signal or voltage being sent to motors. I would guess the signal is not being received or being redirected by pokeys. I've had this working before and cant understand what i may be missing.