I have 4 Am882's I'm in the process of setting up one of them initially had a green led and flashing red (Wiring was wrong for nema's) but not it displays only red.
I've changed the plug and tried the plugs from the other AM882's as well as trying it's plug in them they all work flashing green this one is red.
It's not in the manual, anyone else experienced this? Am I looking at a scrap AM882.
Results 1 to 3 of 3
-
11-09-2017, 01:13 AM #1
Member
- Join Date
- May 2017
- Posts
- 31
AM882 solid red led, no green led
-
11-09-2017, 01:43 AM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: AM882 solid red led, no green led
Try disconnecting the motor, then power off, then power on the drive.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
11-09-2017, 04:08 PM #3
Member
- Join Date
- May 2017
- Posts
- 31
Re: AM882 solid red led, no green led
Have done many times, tried it at 24v still red led, I have bought a new AM882 to replace it, this one is an AM882h which support AC and DC in so I'm going to see what happens when I feed it 50v AC.
Originally Posted by ger21
Reply With QuoteSimilar Threads
-
AM882 Drivers setup cable
By joel0407 in forum Stepper Motors / DrivesReplies: 2Last Post: 07-26-2017, 03:45 PM -
Need advice Leadshine AM882
By IN-WondeR in forum LeadshineReplies: 0Last Post: 04-14-2017, 02:24 PM -
AM882 chinese FAKE ALERT question.. strange differences...
By pierantoine in forum LeadshineReplies: 9Last Post: 06-01-2015, 03:27 AM -
AM882 heats motors up
By Antennas in forum LeadshineReplies: 2Last Post: 05-10-2015, 02:26 AM -
HELP! C35 BOB: RJ45 to AM882 driver.
By rotule in forum Stepper Motors / DrivesReplies: 5Last Post: 04-05-2014, 05:36 PM
Tags for this Thread
Posting Permissions
