[perinj95]

hi.

my workplace bought a new mazak 530c with smooth g controller in April.

and I am just starting to test out fusion to our 4'th axis. I have some problem with the post processor.

when I post the code, the post process do not write the movement for the A axis. it will use something called TCP(tool center on point, I believe it was) my machine do not have that function.
do anyone have a modified post processor ? ore maybe someone can tell me how I modify the one I have, so that the post process writes the code for the A axis?

now I am using the 4'th axis post process for HAAS but the code needs a lot of tweaking after being posted. and it is starting to take a lot of my time that I don't have.

PS: I am not at all sure how to make changes to a post processor.

I am thankful for all help I can get.

[Blackened]

hi.

PS: I am not at all sure how to make changes to a post processor.

When you go to post process your code, choose your post processor and click on config.

The *.cps files are based on Javascript.

Can't help with the rest I'm afraid. I'm just learning myself and I'm working with 2.5D lasers.

This is a good resource too:
https://forums.autodesk.com/t5/hsm-p...forum/bd-p/218

[perinj95]

the machine i use don't have the option G43.5
and fusion wants to use G43.5 insted of writing

this is what i want when i post it (this is just an example
N30 T14 M6
N35 S5540 M3
N40 G54
N45 M11
N50 G0 A-17.98
N55 M8
N65 G0 X86.314 Y0.
N70 G43 Z179.35 H14
N75 G93 G1 A-17.98 F88.84
N80 G94 Z169.35 F5000.
N85 Z168.055
N90 Z166.855 F1000.
N95 G93 X85.997 Z166.841 A-17.89 F577.41
N100 X85.665 Z166.827 A-17.809 F586.79
N105 X85.318 Z166.814 A-17.737 F599.41

but this is what i get
N16 T14 M6
N18 S5540 M3
N20 G54
N22 M8
N24 G43.5 G0 I0. J-0.309 K0.951
N26 X86.314 Y-55.361
N28 Z170.592
N30 X86.314 Y-55.361 Z170.592 I0. J-0.308677 K0.951167
N32 X86.314 Y-52.274 Z161.08 I0. J-0.308677 K0.951167
N34 X86.314 Y-51.875 Z159.848 I0. J-0.308677 K0.951167
N36 G1 X86.314 Y-51.504 Z158.707 I0. J-0.308677 K0.951167 F1000.
N38 X85.997 Y-51.252 Z158.774 I0. J-0.307193 K0.951647 F333.33
N40 X85.665 Y-51.024 Z158.833 I0. J-0.30585 K0.95208

i have ben playing around whit haas post prosecc but it don't work at all like i want it to, the program needs a lot of changes

Anyone that can tell me in detail how o can make this work ?

[perinj95]

the machine i use don't have the option G43.5
and fusion wants to use G43.5 insted of writing

this is what i want when i post it (this is just an example
N30 T14 M6
N35 S5540 M3
N40 G54
N45 M11
N50 G0 A-17.98
N55 M8
N65 G0 X86.314 Y0.
N70 G43 Z179.35 H14
N75 G93 G1 A-17.98 F88.84
N80 G94 Z169.35 F5000.
N85 Z168.055
N90 Z166.855 F1000.
N95 G93 X85.997 Z166.841 A-17.89 F577.41
N100 X85.665 Z166.827 A-17.809 F586.79
N105 X85.318 Z166.814 A-17.737 F599.41

but this is what i get
N16 T14 M6
N18 S5540 M3
N20 G54
N22 M8
N24 G43.5 G0 I0. J-0.309 K0.951
N26 X86.314 Y-55.361
N28 Z170.592
N30 X86.314 Y-55.361 Z170.592 I0. J-0.308677 K0.951167
N32 X86.314 Y-52.274 Z161.08 I0. J-0.308677 K0.951167
N34 X86.314 Y-51.875 Z159.848 I0. J-0.308677 K0.951167
N36 G1 X86.314 Y-51.504 Z158.707 I0. J-0.308677 K0.951167 F1000.
N38 X85.997 Y-51.252 Z158.774 I0. J-0.307193 K0.951647 F333.33
N40 X85.665 Y-51.024 Z158.833 I0. J-0.30585 K0.95208

i have ben playing around whit haas post prosecc but it don't work at all like i want it to, the program needs a lot of changes

Anyone that can tell me in detail how o can make this work ?