508,141 active members
3,605 visitors online
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Registered
    Join Date
    Apr 2017
    Posts
    41

    lighted acrylic signs

    has anyone attempted these with cut2d and an end mill bit?

  2. #2
    Registered
    Join Date
    May 2006
    Posts
    756

    Re: lighted acrylic signs

    Shouldn't be a problem to do that
    Show us the drawing..........
    Attached Thumbnails Attached Thumbnails amp window 3.jpg  
    Been doing this too long

  3. #3
    Registered
    Join Date
    Apr 2017
    Posts
    41

    Re: lighted acrylic signs

    don't have a drawing, was just curious since i don't have vcarve. what would be a good cut depth?

  4. #4
    Registered
    Join Date
    May 2006
    Posts
    756

    Re: lighted acrylic signs

    to begin, never more depth than diameter .004 feed per tooth. rpm according to surface feet per minute.
    Been doing this too long

  5. #5

    Re: lighted acrylic signs

    I use a diamond drag for anything that will be seen from at least a few feet away. .02 step over cross hatch pattern it works quite well for the signs I make
    Attachment 382574

Similar Threads

  1. Plastic Acrylic LED Signs
    By CNC602 in forum Portfolio Board
    Replies: 17
    Last Post: 11-09-2017, 10:31 AM
  2. I want to make edge light acrylic signs, but don't know how!
    By farmertom in forum General Signmaking Topics
    Replies: 10
    Last Post: 07-28-2013, 04:17 PM
  3. Inexpensive Lighted Dust Shoe
    By revwarguy in forum DIY CNC Router Table Machines
    Replies: 25
    Last Post: 03-29-2010, 04:11 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •