585,712 active members*
3,991 visitors online*
Register for free
Login

Thread: High speed spindle problem in HAAS VF2

Results 1 to 2 of 2
  1. 11-17-2017, 03:01 PM #1
    aru91arun
    aru91arun is offline Registered
    Join Date
    Nov 2017
    Posts
    1

    Red face High speed spindle problem in HAAS VF2

    Hi guys,

    I have a 2005 HAAS VF2 3 axis machine here. We bought this machine through an auction around 6 months ago. The machine runs good. Machine is rated to run at 10000rpm. The only problem is, when we put the spindle to more than 5000rpm, the machine shuts the spindle and gives the following messages.

    1) 102 SERVOS OFF

    2) 237 SPINDLE FOLLOWING ERROR( The error between the commanded spindle speed and the actual speed has exceeded the maximum allowable as set in Parameter 184)

    Does anybody knows about this problem?

    Thanks
    Reply With Quote Reply With Quote
  2. 11-18-2017, 01:37 AM #2
    MichaelHenry
    MichaelHenry is offline Gold Member
    Join Date
    Jun 2006
    Posts
    3063

    Re: High speed spindle problem in HAAS VF2

    You might have better luck in a Haas forum - this one caters to mostly hobby machines made by Charter Oak.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Haas high speed machining hsm
    By allenp in forum Haas Mills
    Replies: 7
    Last Post: 06-10-2016, 09:54 PM
  2. HAAS VF2-SS High speed machining 15-5.
    By hairball in forum Videos
    Replies: 0
    Last Post: 09-18-2013, 07:44 PM
  3. Need help! Haas SL-30T lathe high speed not working.
    By arnold wolf in forum Haas Lathes
    Replies: 3
    Last Post: 07-12-2013, 08:41 PM
  4. Spindle Speed Problem on Haas VF-2!
    By Machineit in forum Haas Mills
    Replies: 8
    Last Post: 02-29-2012, 09:08 PM
  5. Haas Super VF-4 High speed
    By binzer in forum Haas Mills
    Replies: 9
    Last Post: 07-25-2007, 09:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules