First, I have a DM4400. It has the Servo Dynamics SD303 amp and the SEM DC Brush spindle motor. I have both running fine under Flashcut CNC and a small board I made.
I'm pondering replacing both with the Mitsubishi motor and drive similar to the later model DM4400M which had the Mitsubishi Meldas M3 control.
What I am hoping for is someone with a DM440M that can take a picture of:
The spindle motor label
The spindle motor drive label
If feasible the mount on the head of the DM4400 that the motor bolts to.
Post here for others if possible.
Thanks in advance.
Marty
Mesa, AZ
Results 1 to 2 of 2
-
11-18-2017, 01:30 PM #1
Registered
- Join Date
- Dec 2009
- Posts
- 521
DM4400M Spindle motor and drive questions
-
11-25-2017, 12:13 AM #2
- Join Date
- Oct 2015
- Posts
- 6
Hey Marty,
We have a DM4500 with the Mitsubishi Control on it still, not sure if this will help you or not. Let me know
Reply With QuoteSimilar Threads
-
Yaskawa SGDH and SGDA servo motor/drive wiring questions
By rpseguin in forum Servo Motors / DrivesReplies: 81Last Post: 08-30-2021, 04:57 PM -
panasonic minas A4S 200w motor and drive questions
By thesignworks in forum Servo Motors / DrivesReplies: 0Last Post: 07-01-2014, 12:27 PM -
Which motor and drive for g0704 spindle motor control
By JeffsInventions in forum Benchtop MachinesReplies: 17Last Post: 02-14-2013, 01:15 PM -
Z-axis drive motor questions
By oilyamerican in forum Haas MillsReplies: 15Last Post: 04-05-2012, 04:44 PM -
Questions about a VFD for Lathe spindle drive
By gfull60 in forum Shopmaster/ShoptaskReplies: 19Last Post: 03-11-2008, 10:06 PM
Tags for this Thread
Posting Permissions
