585,578 active members*
3,874 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fagor Automation > 8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

Thread: 8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

Results 1 to 2 of 2
  1. 11-22-2017, 01:30 PM #1
    alexfloca
    alexfloca is offline Registered
    Join Date
    Sep 2014
    Posts
    3

    8055T - SPD 1.35 spindle drive error 307 - dc bus voltage low

    Hi all,

    anybody has a clue or solution for Error 307 - dc bus voltage low?
    the spindle drive of a lathe ends up with this error.
    x,z drives work properly. when connecting the drive by rs232 to the pc, the dc bus voltage is always the same 387V even if the other drives show the correct voltage.

    any hint will be greatly appreciated.
    Reply With Quote Reply With Quote
  2. 12-22-2019, 01:35 PM #2
    ghosh7778
    ghosh7778 is offline Member
    Join Date
    Dec 2019
    Posts
    1
    Hi all,

    anybody has a clue or solution for Error 307 - dc bus voltage low?
    the spindle drive of a lathe ends up with this error.
    x,z drives work properly. when connecting the drive by rs232 to the pc, the dc bus voltage is always the same 387V even if the other drives show the correct voltage.

    any hint will be greatly appreciated.[/QUOTE]
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Fagor 8055T Error 214.
    By soapcy in forum Fagor Automation
    Replies: 4
    Last Post: 12-16-2019, 11:56 AM
  2. Spindle Voltage Error (EX06) on a Dainichi BX45 cnc-lathe
    By Sunppaa in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-13-2017, 02:56 PM
  3. vac spindle drive issue under voltage okuma make
    By johnpool in forum Okuma
    Replies: 0
    Last Post: 03-08-2017, 11:37 PM
  4. Partner 9 Certurion 6 Mitsubishi Spindle Drive FR-SF-2-15K Al0 33 Over Voltage
    By BJSwart in forum Milltronics
    Replies: 0
    Last Post: 10-01-2015, 05:29 PM
  5. 8055T v3.13 E-504 error in parameter
    By captain_bas in forum Fagor Automation
    Replies: 8
    Last Post: 12-30-2012, 08:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules