584,812 active members*
5,395 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2017
    Posts
    1

    Lms spindle control 4213 G540

    I am new to cnc machining. Currently working on a LMS 3960 cnc conversion. Could someone spoon feed me how to wire and connect the lms 4213 spindle control module to the Gecko G540? Also, supply the settings for Mach3.

    Currently
    1. I have x, y, and z.axis operational with the g540 and mach3.
    2. I have changed the chip on the lms spindle control board.
    3. I have gotten the 4213 to control the spindle. I followed the wiring diagram and did the jumped the module. I could manipulate the spindle speed with the W1.

    I could not mach3 (M3) to turn on the spindle. Please provide novice level instruction and or pictures.

  2. #2
    Join Date
    Jul 2012
    Posts
    21

    Re: Lms spindle control 4213 G540

    did you ever get it working? im at that point as well and cant get mach3 to turn on my spindle

Similar Threads

  1. G540 spindle control.
    By krakenatwork in forum Gecko Drives
    Replies: 1
    Last Post: 05-08-2017, 05:12 AM
  2. Spindle Wiring and Control with G540.
    By OrangeClockwerk in forum Avid CNC
    Replies: 4
    Last Post: 07-27-2014, 06:32 AM
  3. Another G540, X2, Spindle control problem
    By CerveloRod in forum Benchtop Machines
    Replies: 2
    Last Post: 05-23-2013, 08:22 PM
  4. Is it possible? (G540 spindle control)
    By fretsman in forum Gecko Drives
    Replies: 6
    Last Post: 10-14-2009, 12:27 AM
  5. Spindle Control Through G540
    By john1285 in forum Gecko Drives
    Replies: 1
    Last Post: 09-30-2009, 04:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •