Re: Need help connecting usb to VSD-e drive
Robert,
IN3 is Pin 10 of the CMD connector.
Have a most awesome holiday!
Jeff...
Originally Posted by
machining fool
I have done this procedure in the past, but I am old and forgot. I am using the special usb cable with the six wires that plugs into the drive. When reading the GDtool manual, load GDtool and to connect, turnoff signal power and then turn on. Is the signal power in the 16 wire connector? I will be checking parameters without HV connected. Like I say, I forgot, please help, Robert Brown.
Patience and perseverance have a magical effect before which difficulties disappear and obstacles vanish.