Ok Zoprano
What is your experience with the machine?
Are you satisfied ?
thank you
Ok Zoprano
What is your experience with the machine?
Are you satisfied ?
thank you
I still do not have the machine.
I finalized the purchase a few days.
Enviado do meu iPhone usando o Tapatalk
AH ..ok zoprano
I hope you will not have delay problem.
Please ALLEN
don't forget the Email also.
Every UPDATE here must be also given on Email.
thanks
Cnc have been finished, working video will be sent to you soon.
Check 1325 cnc router XYZ working area
https://youtu.be/AK3eUAotd58
very good...thank you
waiting for other video to see it in working.
best regards
Pls check samples picture,working video is loading up to Youtube.
Step mode test
Choose 1 point position, XY into 0, spindle down to drill 1 hole, then chose step mode, input X 100mm. then spindle move 100mm, spindle down to dill second hole, then use tape to test 2 hole distance, It prove that fact distance is still 100mm.
1325 cnc router engraving Laker'logo on MDF for Sofnacef
https://youtu.be/G_xURjpS81E
thank you for your update.
Please give me a clear images of :
1- electronics parts in the cabinet.
2- omron switches and Over travel limited stop.
3- lubrication system.
best regards
Pls check control cabinet picture, 380v3 phase
Lubrication system on Cnc
Manual lubrication pump connect X Y Z axis each Hiwin blocks (1325 cnc total 12 blocks , Y 4 sets,X 4 sets,Z 4 sets blocks) and Z axis ball screw, Do 3 times lubrication before using cnc work each day.
Limited stop
1 Setup soft limited stop in Weihong NK105 control system, then X 1300mm,Y2500mm,Z300mm.
2 3 pcs Omron limited stop on X Y Z. go home function and limited stop function.
3 hard limited stop, 2 pcs on X axis, 4 pcs on Y axis.
Hello allen
Please I want more video test of the machine.
cut small round shapes
cut complex shapes forms
best regards
hello Allen
Please I am waiting for more video test of my machine.
cut small round shapes
square shapes
cut complex shapes forms
best regards
Same here, been waiting for same as much almost for one 1530 carrousel atc.. i've been in china i know how much they lie.
They usually send you pictures of other people machined, and i can prove this after a couple of times dealing with them
Yes there was an inspection but they use it as an excuse for everything.. never trust anyone with such stuff..
I have switched to a new reliable supplier.. making higher quality machines in less than a month, in china you
Must meet your supplier in person and always research..
And even in your first order don't go big.
nazihdev thank you for your advise.
This is my first experience with chines machines.
Until now my only problemwas after purchase with the delay.
Mr Allen is giving me the photos like you see here and I trust him now.
If I found any problem that you talk about I will mention it here.
Any way I will give all my experience with this machine in the future.
I still waiting for video tests of the machine and some specific pictures.
I hope it will finish good.
Best regards
hello Allen
Please I still waiting for :
video about :
1- cut small round shapes*
2- square shapes
3- cut complex shapes forms
Also :
4- clear photo of the shneider swichs.
5- clear photos of all (servo motors* + spindle) labels* *( serial number model ......)
best regards
Hi
4- clear photo of the shneider swichs. It is in the control cabinet ,you can find it in old picture or attached.
5- clear photos of all (servo motors* + spindle) labels* *( serial number model ......) There are serial number about spindle in old picture, you can find it in the page1 or attached picture , now motor is inside motor cover, Kindly check old picture .
.Any update about your shipping plan? Your agency did not reply me about balance ,shipping time for a longer time than us.Hope you have a same standard for us.
Cutting MDF video link as bellows:
1325 cnc router cutting MDF for Nacef
https://youtu.be/RJEJWq8ho58