584,830 active members*
5,692 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Nakamura Tome TMC-200(C axis + sub spindle) parameters lost
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2006
    Posts
    16

    Nakamura Tome TMC-200(C axis + sub spindle) parameters lost

    Hi

    In transport my battery had 1V and it lose all parameters.
    I found in my maintenance manual some pages of parameters and I put it to controller Fanuc 16T, but I can't find special parameters so my machine is still not working.


    Is anybody has the same machine and help me ?

  2. #2
    Join Date
    Dec 2013
    Posts
    15

    Re: Nakamura Tome TMC-200(C axis + sub spindle) parameters lost

    Hi Sinad,

    I already had this problem, not due to battery discharge, but due to operator mistake.
    Normally you have on paper CNC parameters and PMC ones (timers, keep relays,etc...).

    What did you input ? How does the machine boot up ? On EMG state ?
    Do you have alarm messages ?

    If you are looking for Fanuc option parameters (which might be 9900s on your control), you can ask Fanuc directly.
    Sometimes, they keep it safe in case of this happens.

  3. #3
    Join Date
    Jan 2006
    Posts
    16

    Re: Nakamura Tome TMC-200(C axis + sub spindle) parameters lost

    When I switch on machine, screen displayed only SYSTEM ALARM B104-06.
    Keyboard was disactived. Led Alarm/Status indicates ram parity problem. I checked voltage of system battery - 1V, so machine was paused in loading system because in ram data was faulty.
    I cleared all parameters Restet+Delete+PowerOn, next my system load correctly but parameters was empty.
    I put all parameter form maintenance manual but I don't have 9900params and my machine is not working.
    I push EMG and put all parameters from book to controller.
    Now I have some alarm XZ overtravel, but my PMC not works, ladder exist in eeprom memory.
    9900 params or full backup are necessary for me.

  4. #4
    Join Date
    Dec 2013
    Posts
    15

    Re: Nakamura Tome TMC-200(C axis + sub spindle) parameters lost

    Hello,

    If you don't have datasheet, try contact Fanuc and MTB to see if they have complete backup.
    The only Nakamura backup I've got is on another Fanuc system.

  5. #5
    Join Date
    Jan 2006
    Posts
    16

    Re: Nakamura Tome TMC-200(C axis + sub spindle) parameters lost

    Thanks Cabron

    I sent request for MTB.

Similar Threads

  1. Replies: 1
    Last Post: 06-11-2022, 01:32 AM
  2. Replies: 7
    Last Post: 12-03-2021, 04:14 AM
  3. fanuc nakamura tome TMC-30 parameters lost
    By muhammad shahid in forum Fanuc
    Replies: 3
    Last Post: 06-19-2020, 08:40 PM
  4. Nakamura TOME TMC15M Fanuc-OT Lost parameters
    By roymanvega in forum Fanuc
    Replies: 5
    Last Post: 07-24-2019, 06:16 PM
  5. NAKAMURA TOME TMC 18 parameters lost
    By rai in forum Fanuc
    Replies: 2
    Last Post: 10-05-2017, 12:39 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •