584,841 active members*
4,329 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!
Results 1 to 5 of 5

Hybrid View

  1. #1
    Join Date
    May 2014
    Posts
    3

    .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!

    anybody have any experience with this condition, help is greatly appreciated

    !992 Nakamura-Tome TW-10MM Twin spindle dual turret 6-Axis Live tooliing Fanuc 16-TTA Dual Path control

    Machine has Fujitsu Spindle Drives and motors.

    Machine will not come ready, I can access ladder and parameters but no hydraulics are on, no program editing or other functions
    No Parity alarm and all loaded parameters appear to be right no 913 mem parity alarms

    Machine shows the red EMG in display and a nakamura side A089 Alarm..
    A089 is also undocumented and I can not even find it in the ladder

    The machine has a V-50 card which I am told has something to do with switching the I/O from the left (main) to the Right(sub) side of the machine....

    The V50 Board has an undocumented alarm A099 showing in the display (no documentation available at methods) i am told A099 is a watchdog alarm

    No alarms are showing on the Fuji Frenic 5000W drives

    I can not determine what is causing the machine to not come up, undocumented alarm in fuji that is preventing the V50 board from booting or a fault on the V50 board.

    interesting sidebar.... Prior to trouble when you turned on main breaker.... You could hear 2 coils pulling in.... Now I only hear 1

    HELP.!!!! PLEASE !!!

  2. #2
    Join Date
    Apr 2009
    Posts
    1379

    Re: .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!

    I have no experience with that machine; I suspect that it is not a control issue. Strange that Nakamura has nothing on that alarm.
    Where are you located? Send me a pm with your phone #.

  3. #3
    Join Date
    Dec 2009
    Posts
    947

    Re: .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!

    check for some external alarms,like barfeeder or gauntry loader,as i know that nakamura use to have one of these and the circuits are made,so maybe is an emercency signal that must be bypassed.

  4. #4
    Join Date
    May 2014
    Posts
    3

    Re: .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!

    Thank you for your reply Zava.

    There are no external alarms showing, Barfeeder is clear and no gantry loader, Issue seems to be on V50 board or Frenic 5000W spindle drive

  5. #5
    Join Date
    Oct 2020
    Posts
    3

    Re: .. Fanuc 16-TTA Nakamura-Tome TW-10 HELP PLEASE !!!!!!

    do you still have the machine? I have a manual for this machine.

Similar Threads

  1. Nakamura-Tome TMC-4 with Fanuc 3T
    By mrjjk in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 07-04-2012, 10:39 PM
  2. Nakamura-Tome TMC-2 Fanuc 3T
    By Leblondmakino in forum Fanuc
    Replies: 17
    Last Post: 06-10-2012, 06:29 PM
  3. Fanuc O-TC on Nakamura-Tome TW-20
    By Turning_Guy in forum Fanuc
    Replies: 0
    Last Post: 09-29-2011, 05:05 PM
  4. Nakamura Tome TMC 2 Fanuc 6 Tb
    By deon in forum Fanuc
    Replies: 2
    Last Post: 05-19-2011, 04:26 PM
  5. Fanuc 6T - Nakamura Tome TMC-3
    By mcoulson in forum Fanuc
    Replies: 5
    Last Post: 12-02-2009, 07:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •