Good morning gents,
I've been having a issue with an older Mazak 510C using a SM-YM100K-10 Safety Relay Module (photo attached). I'm getting the"2 EMERGENCY STOP" Fault (photo attached) at Power up and cant clear it. My team and I have been through all the E-Stop buttons & everything seems to be in order. The Mazak Safety Relay is only showing a green power light, all other status light on the unit are off, In the drawing "2 EMERGENCY STOP" is controlled by "AP1 BASE I/O but I cant seem to find that (photo of drawing page is attached).
am I missing something or barking up the wrong tree? We've been down for almost a week so any help id greatly appreciated.
Thread: Mazak 510C "2 EMERGENCY STOP"
Results 1 to 2 of 2
-
11-29-2017, 02:29 PM #1
Registered
- Join Date
- Nov 2017
- Posts
- 1
Mazak 510C "2 EMERGENCY STOP"
-
12-10-2017, 09:13 AM #2
Registered
- Join Date
- Sep 2017
- Posts
- 139
Re: Mazak 510C "2 EMERGENCY STOP"
What about the LED indication on the AP1 card and all drive units ?
Reply With QuoteSimilar Threads
-
Mazak Intergrex 100sy, 33 Emergency stop
By jeverts in forum Mazak, Mitsubishi, MazatrolReplies: 26Last Post: 11-13-2015, 05:24 PM -
MAZAK SQT 10MS - "58 EMERGENCY STOP" EXTERNAL ALARM - HELP!
By mkalavitz in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 01-28-2015, 02:59 PM -
X Axis "Goes Off Pattern", "Awry", "Skewed", "Travels"
By DaDaDaddio in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 05-06-2013, 09:59 AM -
Can i use the emergency stop like a "slide hold" button?
By Vegabond in forum Mach Wizards, Macros, & AddonsReplies: 4Last Post: 07-11-2011, 11:13 PM -
Mazak T-2 "20 NMI Emergency Stop" Error"
By Jeff_Y in forum Mazak, Mitsubishi, MazatrolReplies: 13Last Post: 01-11-2011, 05:35 PM
Tags for this Thread
Posting Permissions
