528,212 active members*
3,125 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Lathes > NED HELP! Haas OL-1 Confetti Screen
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Nov 2017
    Posts
    0

    NED HELP! Haas OL-1 Confetti Screen

    Hi,

    We purchased a used Haas Lathe OL-1 (2006) used from an auction. We were able to talk to several employees from the company that was selling out and they all verified that the machine had been in use up until the sale. We bought the machine, and hauled it to our shop (about 3 hour drive). When we power it up, it gives us this confetti style screen and you can see the cursor blinking in the upper left corner of the screen.
    We did replace the screen but same problem. We then did a continuity test on all ov the video cables and continuity was good on them. Looking for any ideas that anyone may have or who we should have look at it. We were in contact with our local HFO but without even looking at it they said that it needs a Maincon update which would run $8500. We would like to try to troubleshoot it before we just spend that on it. Thanks in advance for any input.

    Attached Thumbnails Attached Thumbnails 20171129_155624_zpsgmum8sq9.jpg  

  2. #2
    Registered
    Join Date
    Sep 2011
    Posts
    42
    We have exact same problem! What was turned out to be the problem?
    John

  3. #3
    Registered
    Join Date
    Apr 2006
    Posts
    46

    Re: NED HELP! Haas OL-1 Confetti Screen

    Maincon PCB error if all cable not lose when transport. Can you take picture of Maincon PCB?

Similar Threads

  1. Fagor 8020 Screen and axis problems. screen waving?
    By dirtrider23 in forum Fagor Automation
    Replies: 1
    Last Post: 12-17-2016, 03:06 AM
  2. HAAS VF4 SCREEN WENT OUT
    By Darren Hill in forum General MetalWork Discussion
    Replies: 2
    Last Post: 11-12-2015, 12:24 AM
  3. HAAS DT-1 "Blue Screen"
    By smecher in forum Haas Mills
    Replies: 5
    Last Post: 03-26-2014, 09:46 PM
  4. 2007 Haas Mini Mill stuck on boot up screen
    By gangpw924 in forum Haas Mills
    Replies: 5
    Last Post: 08-07-2012, 02:00 AM
  5. Searching "Haas" Screen
    By Dano Andry in forum Screen Layouts, Post Processors & Misc
    Replies: 1
    Last Post: 04-18-2009, 08:08 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •