Hello guys, thank you to those who dedicate there time to sites like this. My question is: does anyone have experience with the Sinumeric controller? I want to program a batch counter on our WF machine. I would like the operator to be able to inpout a quantity, and when that quantity has been reached, then the machine would stop, giving a message, that would have to be acknowledged. Then the process would start over again. Thanks to those who will take the time to help.
Thread: Sinumeric
Results 1 to 5 of 5
-
03-28-2007, 01:25 PM #1
Registered
- Join Date
- Mar 2007
- Posts
- 25
Sinumeric
-
03-30-2007, 03:54 PM #2
Registered
- Join Date
- Nov 2006
- Posts
- 925
Siemens uses the Sinumerik name for a lot of different controls.Which one have you got?
Mark.
-
03-30-2007, 09:34 PM #3
Registered
- Join Date
- Mar 2007
- Posts
- 25
I believe it is an 840di.
-
03-30-2007, 10:38 PM #4
Registered
- Join Date
- Nov 2006
- Posts
- 925
I have two pdf`s.I think you need to read section 11 in the programming fundamentals.If you have a broadband connection and an email address I will send them to you.
BTW,what`s a WF machine?
Mark.
-
03-31-2007, 07:58 PM #5
Registered
- Join Date
- Mar 2007
- Posts
- 25
Thanks. A WF is the manufacturer of our flow form machines used to make transmission parts.
Reply With Quote
Posting Permissions
