Will a 64 bit version of windows 7 work in mach3 if I'm using an Ethernet smoothstepper ?
Thread: Mach3 with ESS & 64bit
Results 1 to 5 of 5
-
12-05-2017, 08:30 AM #1
Registered
- Join Date
- Dec 2003
- Posts
- 33
Mach3 with ESS & 64bit
-
12-05-2017, 10:09 AM #2
Member
- Join Date
- Jun 2010
- Posts
- 4256
Re: Mach3 with ESS & 64bit
YES - based on personal experience.
Cheers
Roger
-
12-05-2017, 01:29 PM #3
Registered
- Join Date
- Dec 2003
- Posts
- 33
Re: Mach3 with ESS & 64bit
Are there any settings I need to adjust to make the 64bit version work or play well with others?
-
12-05-2017, 01:49 PM #4
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Mach3 with ESS & 64bit
Nope. Just don't install the parallel port driver when you install Mach3.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
01-14-2018, 10:08 PM #5
Registered
- Join Date
- Dec 2016
- Posts
- 19
Re: Mach3 with ESS & 64bit
I just completed a new screen set and I am looking for people to try it out
Based on your setup
"Will a 64 bit version of windows 7 work in mach3 if I'm using an Ethernet smoothstepper ?"
You are the perfect setup.
Are you interested?
If so you can get it here.
Licensing – nGeneYes, Inc – Software Working for Business
If not no worries
Reply With QuoteSimilar Threads
-
Best way to setup Mach3(or4) with Windows 7 64bit
By Propwrench1 in forum Mach Software (ArtSoft software)Replies: 9Last Post: 09-07-2016, 08:17 AM -
Mach3 windows 7 64bit LPT PORT - BOB not working?
By mrgame1988 in forum Benchtop MachinesReplies: 3Last Post: 10-03-2015, 01:06 PM -
PARTMASTER V13 not installing on WIN 7 64bit
By frankv1 in forum Dolphin CAD/CAMReplies: 0Last Post: 11-28-2014, 01:25 PM -
Windows 7 64bit - Mach3 - ugh, one more thing to deal with now....
By airbrush in forum Mach Software (ArtSoft software)Replies: 6Last Post: 03-08-2014, 08:14 PM -
MasterCam X5 on windows 7 - 64bit
By pearldiver in forum MastercamReplies: 1Last Post: 07-27-2011, 03:21 AM
Tags for this Thread
Posting Permissions
