584,805 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    159

    Arc smoothing

    IS their an arc smoothing feature for mastercam for helical entry?
    Now featuring Plasmaland online

  2. #2
    Join Date
    Sep 2008
    Posts
    87

    Re: Arc smoothing

    Are you getting little tiny line moves???

    There are a few issues.
    1 - inside the toolpath make sure linearize arcs is not clicked.
    2 - inside you control definition make sure helix supported is checked under arc moves.
    3 - sometimes under arc moves error checking turns them into lines. play with these settings if all else fails.

Similar Threads

  1. Aspire poor stl quality
    By iSuat in forum Aspire
    Replies: 3
    Last Post: 07-28-2017, 01:06 PM
  2. Poor Cut Quality
    By JerseyBill in forum Hypertherm Plasma
    Replies: 4
    Last Post: 05-11-2012, 11:43 PM
  3. Poor cut quality
    By NorthridgeFab in forum PlasmaCam
    Replies: 6
    Last Post: 12-18-2011, 07:14 PM
  4. 3/16 Aluminum - POOR CUT QUALITY
    By zeoncomp in forum Waterjet General Topics
    Replies: 12
    Last Post: 08-01-2010, 05:10 PM
  5. tri-power poor quality
    By digitalmdj in forum Shopmaster/Shoptask
    Replies: 12
    Last Post: 12-02-2007, 01:45 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •