584,802 active members*
4,870 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Rhino 3D > Pasting into command line works with single line pastes, but not multiple
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2017
    Posts
    8

    Pasting into command line works with single line pastes, but not multiple

    Hi,

    I am having trouble executing while pasting into the command line.
    When i paste these commands ( attachment: create box.txt ) into rhino it does not work as i expect.

    Desired: If i run commands from file or copy/paste the whole contents: only one box is created (attachment: only one.jpg)
    What i get: If i copy / paste lines one-by-one:the complete model (complete box.jpg)

    This was working before to create whole model with one paste, and i don't know what changed.

    Rhino 3D:Version 5 SR14 64-bit(5.14.522.8390, 2017-05-22)

    Win10 pro - 64 bit, fall creators update.

    Thanks for the help.
    Attached Thumbnails Attached Thumbnails complete box.jpg   onlyone.jpg  
    Attached Files Attached Files

  2. #2
    Join Date
    Dec 2017
    Posts
    8

    Re: Pasting into command line works with single line pastes, but not multiple

    anyone have any clues as to what could be going wrong? I changed line endings but there was no change.

  3. #3
    Join Date
    Dec 2017
    Posts
    8

    Re: Pasting into command line works with single line pastes, but not multiple

    Hi,
    The problem has to do with material references. Specifically that the rhino materials were not embedded into the file. No script command is available to embed them.

Similar Threads

  1. Command Line Script
    By emiemi in forum G-Code Programing
    Replies: 1
    Last Post: 05-03-2016, 02:50 PM
  2. command line control
    By wjfiles in forum Mechanical Calculations/Engineering Design
    Replies: 2
    Last Post: 06-04-2006, 01:11 PM
  3. Single line mode works well, Auto is not soo good??
    By Darc in forum CamSoft Products
    Replies: 16
    Last Post: 10-26-2004, 09:29 PM
  4. Line command
    By cncadmin in forum Uncategorised CAM Discussion
    Replies: 4
    Last Post: 06-26-2003, 08:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •