584,837 active members*
5,391 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Hobbycnc (Products) > Will these stepper motors work?
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2006
    Posts
    37

    Will these stepper motors work?

    I have the HobbyCNC 3 axis Pro board and was wondering if these steppers are compatible.

    https://www.omc-stepperonline.com/do...HS39-3008D.pdf

    Steve

  2. #2
    Join Date
    Apr 2004
    Posts
    5728

    Re: Will these stepper motors work?

    They would probably work, but aren't ideal. That board won't tolerate more than 42 volts, but those motors want about 55v for best performance. If you haven't bought them yet, look for some with less inductance. 2 mH or less would be preferable.
    Andrew Werby
    Website

Similar Threads

  1. Need to work out voltage for unknown stepper motors
    By justinj in forum Stepper Motors / Drives
    Replies: 16
    Last Post: 01-02-2015, 10:32 PM
  2. Stepper motors don't seem to work :-(
    By winand in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 03-05-2014, 09:07 PM
  3. 1 Driver 2 Stepper Motors, is it possible will it work?
    By guy2b1 in forum DIY CNC Router Table Machines
    Replies: 31
    Last Post: 07-11-2012, 04:42 PM
  4. Making Stepper Motors Work Reliably
    By SCzEngrgGroup in forum Benchtop Machines
    Replies: 24
    Last Post: 09-14-2009, 09:11 AM
  5. Will These Work (Stepper Motors)
    By Hawkeye in forum DIY CNC Router Table Machines
    Replies: 9
    Last Post: 12-06-2003, 06:53 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •