584,802 active members*
4,939 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Tree > Squaring Machine Table Tree760
Results 1 to 2 of 2
  1. #1
    Join Date
    Dec 2017
    Posts
    2

    Squaring Machine Table Tree760

    At my company we recently moved our Tree 760 to a new location. With the manual we were able to level the machine within the permissible deviation. However after indicating a precision square straight in the X, we found that the Y axis was out of square .001"/8.0. The manual does not clarify how this issue should be resolved. I watched some youtube videos on squaring other machines and they talk about adjusting the table on the ways. However I have also heard the idea floated around about adjusting the feet on the bottom to essentially twist the casting back to square.

    Was just wondering if anyone has any experience with something like this on this type of machine? Thanks much.

  2. #2
    Join Date
    Dec 2017
    Posts
    2

    Re: Squaring Machine Table Tree760

    Figured it out.

Similar Threads

  1. Squaring a slaved Gantry machine
    By markskells in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-02-2016, 07:58 PM
  2. Squaring the XY table on a cheap 40W laser cutter?
    By slow_rider in forum Laser Engraving / Cutting Machine General Topics
    Replies: 4
    Last Post: 09-11-2015, 08:08 AM
  3. Squaring the head to a table. Shimming.
    By zaebis in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 04-27-2013, 05:22 PM
  4. Squaring up the machine
    By mickelsen in forum Calibration / Measurement
    Replies: 2
    Last Post: 04-26-2011, 08:52 PM
  5. Squaring up my machine
    By analogman in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 04-30-2009, 02:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •