I would like to be able to probe a bore that is egged to find the average center of the bore. The issue is that I cant find a probing cycle that will allow more that 4 points. Is there any help out there?
Results 1 to 3 of 3
-
12-15-2017, 06:19 PM #1
Registered
- Join Date
- Dec 2006
- Posts
- 116
NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
WANNA GO FASTER
-
12-15-2017, 07:03 PM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
Might be time to dust off your Blake indicator and locate manually. You know, the old way of doing it.
Jim Dawson
Sandy, Oregon, USA
-
12-19-2017, 04:23 PM #3
Registered
- Join Date
- Feb 2006
- Posts
- 1792
Re: NEED TO PROBE A BORE WITH MORE THAN 4 POINTS WITH RENISHAW PROBE
Probing cycles are available for 3 or 4 touch points. Repeat these several times at different locations, and calculate the average manually.
Reply With Quote
Similar Threads
-
WANT TO PROBE BORE WITH MORE THAT 4 POINTS WITH RENINSHAW PROBE
By metlshpr in forum Calibration / MeasurementReplies: 0Last Post: 12-15-2017, 06:09 PM -
TP-100 Probe - Compare Performance Motion probe to IMService probe
By dgoddard in forum Digitizing and Laser DigitizingReplies: 3Last Post: 04-06-2013, 07:13 PM -
Mp7 Renishaw probe
By Cncjunkie in forum CNC Machining CentersReplies: 5Last Post: 02-02-2006, 04:13 PM
Tags for this Thread
Posting Permissions
