[phoodieman]

Why doesn't this G92 not work? Fanuc Series 2iTB controller.

I'm thinking a thread parameter change.

it gets here

G0 G54 X3.071 Z.2 M8

Then it just goes home.


%
O0001
(PROGRAM NAME - BOX)
(DATE=DD-MM-YY - 21-0ZONTAL\C1-120 CARRIER\CI)
(NC FILE - R:\OPER HORIZONTAL\C1-120-61203 DF SCALLOPE)
(MATERIAL - STEEL INCH - 1030 - 200 BHN)
G20
(TOOL - 3 OFFSET - 3)
(OD THREAD RIGHT INSERT - NONE)
G0 T0303
G18
G97 S450 M03
G0 G54 X3.071 Z.2 M8
G92 X2.8571 Z-1.6 F.125
X2.8449
X2.834
X2.8241
X2.8149
X2.8062
X2.798
X2.7903
X2.7829
X2.7758
X2.769
X2.769
G0 X3.071
M9
G28 U0. W0. M05
T0300
M30
%

[MrSolution]

You have three types A,B,C for lathe @Fanuc.
This Gcode can be different, based on which type your controller is set.
It can be changed in PLC