584,866 active members*
5,072 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Stepper Motors / Drives > mentor needed G0704 Eletronics
Results 1 to 8 of 8
  1. #1
    Join Date
    Dec 2017
    Posts
    5

    mentor needed G0704 Eletronics

    I am new to the cnc world. Tring to put together a cnc mill but cant seam to get my motors up and running. C11G Breakout board,uc100 controller and Mach4. I'm having a hard time just getting my motors up and running. My wiring looks good. Wonder if it a software thing. HElPPPP!
    Thanks
    A Leaphart

  2. #2
    Join Date
    Jul 2016
    Posts
    660

    Re: mentor needed G0704 Eletronics

    I love this kind of scenario, modification, custom recalibration, you can post some photos of your hardware to let us see where you`re at.

  3. #3
    Join Date
    Mar 2017
    Posts
    411

    Re: mentor needed G0704 Eletronics

    Some schematics would be good to show how you have connected everything.

  4. #4
    Join Date
    Dec 2017
    Posts
    82

    Re: mentor needed G0704 Eletronics

    Hi

    I can work with you online to setup your machine.

    please email me [email protected] and send me more information
    about your wiring

    - - - Updated - - -

    Hi

    I can work with you online to setup your machine.

    please email me [email protected] and send me more information
    about your wiring

  5. #5
    Join Date
    Dec 2017
    Posts
    5
    Quote Originally Posted by mattcnc123 View Post
    Hi

    I can work with you online to setup your machine.

    please email me [email protected] and send me more information
    about your wiring

    - - - Updated - - -

    Hi

    I can work with you online to setup your machine.

    please email me [email protected] and send me more information
    about your wiring
    I sent u an email

  6. #6
    Join Date
    Dec 2017
    Posts
    5

    Re: mentor needed G0704 Eletronics

    http://i563.photobucket.com/albums/s...ps9i49i4i8.jpg
    http://i563.photobucket.com/albums/s...psk2f0kiv9.jpg
    https://www.automationtechnologiesin...or-3-axis-kit/

    I hope the link works. That's the kit I'm using. I changed out the c10 to c11G. Also using uc100 Controller with Mach4. Only light on C11g board is power? Both lights on the back of the uc100 are on and steady.
    A Leaphart
    Attached Thumbnails Attached Thumbnails thumbnail1_zps9i49i4i8.jpg  

  7. #7
    Join Date
    Jul 2016
    Posts
    660

    Re: mentor needed G0704 Eletronics

    http://www.cnczone.com/forums/attach...d=382252&stc=1

    http://www.cnczone.com/forums/attach...d=382254&stc=1

    Ok I think it`s a nice kit you got there, just assemble everything on the schematic provided and hook it up to a PC with a parallel port and that`s it, no flings no messing, tell us what`s your software used for this and PC set-up




    First thing you need is to set-up your PC, (LPT port address on the BIOS, etc) what operating system you got? make sure the LPT port is detected properly on the windows environment.
    Attached Thumbnails Attached Thumbnails IMG_1595_zpsk2f0kiv9.jpg   NEMA23-34-Seig-Kit-1024x1024.jpg  

  8. #8
    Join Date
    Dec 2017
    Posts
    5

    Re: mentor needed G0704 Eletronics

    G0704 Mill. Windows 10.
    Don't think I did the LPT port Address. I have downloaded the software off UC100 Site.
    A Leaphart

Similar Threads

  1. Software/Eletronics
    By Ablackm01 in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 0
    Last Post: 04-13-2016, 03:41 PM
  2. Mentor needed
    By nickwad in forum Mentors & Apprentice Locator
    Replies: 2
    Last Post: 02-03-2014, 08:02 AM
  3. I need EXTREME help with 540 and Eletronics! Please!!!!!!
    By CROSSHATCH in forum Gecko Drives
    Replies: 200
    Last Post: 01-20-2009, 01:47 AM
  4. mentor needed
    By sundy58 in forum Mentors & Apprentice Locator
    Replies: 0
    Last Post: 08-27-2006, 03:22 PM
  5. Hs Cnc & Basic Eletronics
    By stanfield in forum Community Club House
    Replies: 5
    Last Post: 04-29-2004, 10:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •