Is there a way to drip feed to the Hurco KM3P it only seems to have an upload button or is there a way to add more internal memory.
Thanks
Is there a way to drip feed to the Hurco KM3P it only seems to have an upload button or is there a way to add more internal memory.
Thanks
Hi, don’t know if you got your problem sorted, but you can’t add any memory, also I think you can download from floppy and the RS232 ports on the back if you have them, it can also depend on you software version as it was constantly being updated.
But, rather than using cadcam, unless you are doing 3D, try and use the conversational software, it is faster to do 2D on the control than using cadcam.
I hope that is helpfull.