[greekart]

Hello guys, i have NVEM 6 axis ethernet controller and i want to use the pins for mpg with custom buttons e.t.c

I connect everything and i can change Axis selection and probably Step selection, but i have no idea how/with what to control the movement from WHA+ WHA- pinout.

I have a PS1010-20 Switch pulse rotary and thought i could but i can't find what i am doing wrong if it could.

The pulse rotary need to add +dc voltage and gnd? Not enough pins for that

Can you help me or point me the right direction to make it happened?



Thanks in advance

[greekart]

No one have any idea? I use all combinations and nothing .

Now i get this one https://www.ebay.com/itm/Rotary-Encoder-400P-R-6mm-Incremental-Optical-Shaft-Working-Measurement-5-2-Y0A1/252862587483?epid=857636894&hash=item3adfc8e25b:g0gAAOSwc-tY7yh9

but again nothing change. I am thinking about the plugin of the board may is not the right even if i try all i find.