584,805 active members*
4,854 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Dec 2017
    Posts
    82

    Cnc4pc c62 Board help please

    Hello

    I use c62 board and I am very happy with that.

    my question is

    all my inputs set to be activate with 24 volt .
    all jumpers set for that and when I connect the
    input to 24 volt green led in mach turn on.

    my problem is that

    I got a tool setter sensor and it works with 5 volt.
    I can use the output of c62 for 5 volt.

    The sensor will activate when it sink to common I guess it has to connect to
    zero volt.
    how I have to change the input 5 port 1 only to
    work with that. I want all other inputs still activate with
    +24 volt.

    which jumpers I have to change ?

    how can I do that ?

    please Help.

  2. #2
    Join Date
    Dec 2017
    Posts
    82

    Re: Cnc4pc c62 Board help please

    Still waiting .

    Any help please ?

  3. #3

    Re: Cnc4pc c62 Board help please

    Yes, all I/Os have jumpers to select the operating voltage for each pin. This is the same for inputs or outputs.

    Let me know if it is clear.

    Arturo Duncan
    http://cnc4pc.com

  4. #4
    Join Date
    Apr 2003
    Posts
    540

    Re: Cnc4pc c62 Board help please

    Original message removed. Sorry for jumping in with incorrect advice Arturod, I didn't realize each input pin had it's own jumper! Makes it simple, like you said he just needs to set the jumper for the sensor input pin to 5v.

  5. #5

    Re: Cnc4pc c62 Board help please

    Yes, you can. You do have a jumper to set the common to be used for each group of I/Os, and there are independent jumpers for each pin to select if that pin would use +5vdc or +12/24vdc logic. I know the way we set it up may be a little unconventional, but it allows wiring I/Os without having to use external pull-up/down or in-line resistors. So you can wire common industrial sensors, relays or other devices using TTL signals.

    Arturo Duncan
    http://cnc4pc.com

Similar Threads

  1. ESS with C52 Board from CNC4PC
    By ballistic42 in forum Benchtop Machines
    Replies: 0
    Last Post: 11-09-2015, 04:15 PM
  2. CNC4PC C17 master control board: is anyone using this board
    By Novett in forum CNC Machine Related Electronics
    Replies: 0
    Last Post: 10-11-2014, 11:51 PM
  3. Hobbycnc ez and cnc4pc C11 board
    By Lasr Da Vinci in forum Controller Cards
    Replies: 0
    Last Post: 10-29-2012, 04:31 PM
  4. CNC4PC C1 Board
    By BTS in forum CNC Machine Related Electronics
    Replies: 3
    Last Post: 06-07-2011, 09:22 PM
  5. 320's and cnc4pc multifunction board
    By dewme5 in forum Gecko Drives
    Replies: 1
    Last Post: 08-16-2006, 04:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •