584,812 active members*
5,416 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Colchester Tornado lathes > Colchester Tornado 200 cross slide broken
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2018
    Posts
    1

    Colchester Tornado 200 cross slide broken

    Hi.
    I have a Colchester Tornado 200.
    I had a crash last week. After the turret has been crashed, the cross slide is broken and X Axis ballscrew is doubted.
    I contacted the Colchester 600 UK representative.
    The representative told me that the X Axis ballscrew is ex stock but unfortunately,
    cross slide is no longer available.

    If anyone knows where I can buy a cross slide for the x-axis at Colchester Tornado 200 (or 300 because the cross slide is the same) , new or used please help me.

  2. #2
    Join Date
    Aug 2018
    Posts
    12
    Hi.

    I see that you have a Colchester Tornado 200 and I need your help.

    It happens that one of the memories of the PLC apparently was damaged and I need the information of this so that the machine starts. Can you provide me this information?

    Thank you very much

Similar Threads

  1. Replies: 8
    Last Post: 12-14-2016, 04:19 PM
  2. colchester tornado 200
    By fazico in forum Questions or Problems
    Replies: 0
    Last Post: 11-03-2015, 06:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •