Helppp
Have syntec 6mb
What can cause misalignment in y axis?
Pocket tool path off by 3mm in y comparing to v90 tool path..
Test panel ran perfect befor big job ran..
Sent from my SM-G920F using Tapatalk
Helppp
Have syntec 6mb
What can cause misalignment in y axis?
Pocket tool path off by 3mm in y comparing to v90 tool path..
Test panel ran perfect befor big job ran..
Sent from my SM-G920F using Tapatalk
You could have slop in you machine... but probably not.. since the V shape looks ok...
I would suspect more of a programming issue...
I don't know if the CAM is greating the GCODE correctly...
Let us know what else is happening.
I'm assuming you are making Doors... what software is this from?