584,829 active members*
4,944 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Haas Machines > Haas Mills > programs for Marposs probing
Results 1 to 5 of 5
  1. #1
    Join Date
    Jan 2013
    Posts
    32

    programs for Marposs probing

    Hey all,
    the shop i work for has four older 1996 Haas vmc's. each one has a Marposs T60 touch probe and a receiver mounted in the machine. it seems they have NEVER been used. the guys that have been here 30 years say they are junk and they dont work. i have used Renishaw and i have no clue about Marposs. my feeling is these guys have no idea how to use probes and that is why they call them "junk". over time all the programming for them has been deleted and long gone. all i got it the actual equipment with no manual or programming.
    how can i go about getting these things up and running?
    i did find a user guide for FANUC controls on the marposs sight but its more of an operators guide for the cycles similar to the Renishaw easyset stuff but no actual programs.

    thanks in advance for any help i can get.

  2. #2
    Join Date
    Nov 2007
    Posts
    479

    Re: programs for Marposs probing

    I would contact marposs directly. Im in michigan where they have HQ, my HFO guys say they are easy to work with.

  3. #3
    Join Date
    Jul 2014
    Posts
    17

    Re: programs for Marposs probing

    Get a hold of your local HFO or Haas,they should have the programs you need to run the probe.

  4. #4
    Join Date
    Nov 2009
    Posts
    47

    Re: programs for Marposs probing

    The marposs macros are very easy to deal with. We have one installed on a Milltronics RH35 vmc and a renishaw on our fanuc machine.

  5. #5
    Join Date
    Jan 2013
    Posts
    32

    Re: programs for Marposs probing

    hey guys thanks for the replies. i did find a few old 3.5 disk floppies that should be an install disk. i just need to scrounge up a floppy reader to USB. im sure ill be asking more questions as things progress.

Similar Threads

  1. marposs probe
    By reedmiles in forum Haas Mills
    Replies: 12
    Last Post: 03-21-2016, 06:43 PM
  2. Seeking Marposs knowledge
    By probeguy in forum Mentors & Apprentice Locator
    Replies: 1
    Last Post: 02-21-2010, 04:25 PM
  3. Marposs CNC
    By MLC343 in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 02-11-2010, 08:01 PM
  4. Marposs T25 probe problems
    By 2alpha in forum Milltronics
    Replies: 1
    Last Post: 11-05-2007, 02:50 PM
  5. Milltronics BR-50--- Marposs Laser
    By torch in forum Milltronics
    Replies: 7
    Last Post: 10-04-2006, 09:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •